The seven killers of car paint

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%CD%BF%C1%CF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Automotive paint has little impact on the overall performance of the car, but it is absolutely dominant for the aesthetics of the car. Painted killers are everywhere, the natural oxidation of the paint surface, the exhaust of the car and the iron powder present in the air. In the rainy season, special attention should be paid to the corrosion of paint paint by acid rain, bird droppings, gums and iron powder.

First, the paint surface oxidation

Under the ultraviolet light of the sun, the paint film will continuously evaporate the oil into the air to protect itself. For a long time, the paint will be over-dispersed. The brightness and depth of the paint surface are greatly reduced, so that the paint surface is gradually whitened to form an oxide layer, which shortens the life of the paint, and the naked eye can observe the phenomenon of black, white and dull paint. If the oxidation is severe, it can be treated by grinding and polishing.

Second, the traffic film

The vehicle generates a strong electrostatic layer due to friction during driving. The static electricity has strong adsorption capacity for dust, oil and chemical dust. After a long time, a hard traffic film will be formed. This "traffic film" can easily make the paint surface. Oxidation corrosion occurs, which can be treated by grinding and polishing.

Third, crack

If the paint is not treated properly, the metallic paint may produce a very fine crack, which will continuously penetrate the paint until it penetrates the entire paint layer. This phenomenon is called “cracking”. Sometimes cracks can occur due to problems with the quality of repainting. If there is car wax in the crack, you will find a streak crack in the body. Regular waxing can gradually reduce the occurrence of cracks.

Fourth, fade

Soots and pollutants in the atmosphere are the main causes of discoloration and fading of paints. Fading is different from oxidation. When fading occurs, the paint will show uneven chromatic aberration. Medium and light fading can be treated by grinding and polishing. In severe cases, it must be repainted.

V. Corrosion

The etch is a surface abrasion. Insects, bird droppings, sap, tar, and asphalt all have etch marks. Slight etches can be solved with abrasive polishing.

Six, shallow scratches

Due to improper friction and daily care, the paint surface showed slight scratches, but the primer was not exposed. This scratch is more obvious in the sun. It is generally removed by a professional polishing method.

Seven, water marks

The water mark is a trace left after the water droplets evaporate and is in a ring shape. Oxidized, commonly used washing detergent cars are prone to water marks. Minor water marks can be cured by waxing and polishing, and in serious cases, grinding or painting.

OTIS Elevator Spare Parts

OTIS Elevator Spare Parts, OTIS Elevator Parts

XiziOTIS Elevator Spare Parts, XiziOTIS Elevator Parts


Otis is the world's largest manufacturer and maintainer of people-moving products, including elevators, escalators and moving walkways. Founded more than 160 years ago by the inventor of the safety elevator, Otis offers products and services through its companies in more than 200 countries and territories, and maintains approximately 1.9 million elevators and escalators worldwide. Otis is a unit of United Technologies Corp., a leading provider to the aerospace and building systems industries worldwide


People Nearly 66,000 employees globally with approximately 1,000 branch offices
Revenue $12 billion in 2015
Installed Base

Approximately 2.6 million Otis® elevators and escalators in operation worldwide

Service Base Approximately 1.9 million elevators and escalators serviced by Otis worldwide
Countries Products sold and serviced in more than 200 countries and territories
Manufacturing Major manufacturing facilities on four continents
Engineering and Test Centers

Otis has a network of research and engineering facilities and test towers around the world

Company's two tallest elevator test towers are located in Shibayama, Japan (505 feet or 154 meters above ground; 89 feet or 27 meters below ground) and Bristol, Conn., United States (384 feet or 117 meters above ground)

OTIS Elevator Spare Parts,OTIS Elevator Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjelevatortravelingcable.com