Maximize efficiency and minimize production costs
Just like any other mass production, factors such as safety, fast production cycles, and high quality are especially important when manufacturing transmission parts. However, the first goal is to reduce the total cost of each part.
In order to be able to support our customers in the best possible way, Sandvik Coromant can continue to enrich our application knowledge to meet future challenges. By working closely with our customers around the world, our tooling solutions and extensive application know-how set new standards in the field of transmission manufacturing.
Prepare for hard part turning
Hardened steel materials dominate the manufacture of shafts and gears. Usually, this refers to steel with a hardness between 55-65 HR. Such hardness makes such parts difficult to machine due to high cutting forces and high temperature effects.
If a CBN insert is used for hard part turning, the grinding process can be eliminated, thereby increasing production efficiency. The facts also prove that hard part turning can reduce processing time and cost by more than 70%. Not only is it more flexible, it shortens delivery times, but it also allows multiple processes to be performed in one setup. Environmental benefits are also evident - no coolant dry cutting, chips can be recycled and easier to handle.
When turning hard parts, the cutting tool material needs to have good chemical and thermal stability, mechanical strength and wear resistance of the wear resistant material. Our unique CBN materials CB7015 and CB7025, combined with optimized edge treatment, ensure safe, reliable and predictable performance.
Soft material stage - turning
The success of hard part turning depends to a large extent on the soft material stage turning process that was performed before it. Excellent soft material turning minimizes surface machining defects. For this type of process, the ideal choice is to use Inveio?'s new steel turning materials GC4315 and GC4325.
The GC4325 can be used at this time if the cutting speed is moderate under different operating conditions.
For higher cutting speeds, please select GC4315. Designed for mass production of parts, the GC4315 provides the best start for shaft and gear turning. Suitable for continuous to light intermittent cutting.
Barbed wire
Materials:high quality low carbon steel wire,PVC wire.
Weaving and characteristics:twisting and weaving.
Uses:used in protecting grass boundary,railway,highway,ect.
Barbed Wire,Steel Barbed Wire,Galvanized Barbed Wire,Pvc Coated Barbed Wire,Barbed Iron Wire
Anping Sanxing Wire Mesh Factory , https://www.sanxingwiremesh.com