When purchasing ceramic tiles, you must pay attention to whether the ceramic tile production process is excellent, and also check whether the ceramic tiles have formal product names, factory sites, specifications, grades, trademarks, etc. One point to note here is to purchase tiles according to different room requirements.
Doctors need to "look, smell, ask, cut" when they see a doctor. Now when buying porcelain, we can diagnose and test the quality of porcelain tiles through four aspects: listening, water, cutting and watching.
1. "Listen": Use one hand's thumb, forefinger and middle finger to clip a corner of the tile, and easily hang down. The other hand's index finger taps the middle and lower part of the tile, such as the sound is clear and pleasing to the top, such as dull sound and turbidity.
2. "Water": The water droplets are on the back of the tile, and the water is diffused and the temperature of the tile is slow.
3. "Cut": Look at the break of the tile fragment. The break is fine, hard and brittle, and the color is consistent.
4. “Lookâ€: Under the illumination of sufficient natural light or fluorescent lamp, the brick should be placed vertically at a distance of 1 meter. The obvious glazed defect pattern should be inconspicuous and realistic, without obvious lack of color and broken line. Defects such as misalignment; the back shading, trademark, etc. are clear and complete, with few glazes or defects; place a batch of products vertically on a flat surface to see if there is any jaggedness; choose a flat surface glass The board, the plastic board, the table top or the ceramic tile, the side and the front side of the brick are respectively adhered to the surface in parallel, and the degree of flatness of the side and the degree of warpage of the surface are observed. You can also hold the sides of the two bricks together to see if there are any gaps.
Kitchen Accessories,Kitchen Cabinet Accessories,Kitchen Board,Kitchen Supplies
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiaogroup.com