Solid wood furniture: use special cleaning agent to maintain the fabric sofa: use the sofa towel panel furniture with good water absorption performance: install waterproof glass fiberglass furniture under the furniture legs that are easy to absorb water: avoid direct sunlight, do not let the oil stay too long.
Solid wood furniture Lightly rubbed with protective wax or detergent In recent years, solid wood furniture has been sought after by everyone because of its good environmental performance and quality. So, in the summer, what kind of care does solid wood furniture need?
Mei'an Chunmei said that solid wood furniture should be maintained with a special cleaning agent. It can be evenly applied to the surface of the furniture with protective wax or special cleaning agent, and then gently wiped to maintain its luster and moisture. In order to prevent the wooden furniture door from being deformed by moisture, it is best to close it by hand so as to prevent it from being deformed by moisture. Also note that in hot weather, try not to use a cloth with water to wipe the wooden floor to prevent it from being deformed by moisture and reduce the service life.
Fabric sofas It is best to use a comfortable absorbent sofa towel. The sofa provides comfort for our life, and this comfort also happens to be a place for dust, water vapor, etc., especially for soft sofas such as fabric sofas and soft beds. For the fabric sofa that is deeply loved by consumers, Zhao Fang reminds that the dust on the surface should be sucked out by a special vacuum cleaner. In the wet weather, the fabric sofa is best to use a sofa towel with good water absorption performance, and it is often cleaned. .
Panel furniture Easy to absorb furniture under the legs with waterproof pad The furniture of the panel furniture is beautiful and the price is moderate. Because the substrate needs to be sealed during the on-board production process to achieve the function of insulating air and moisture, if the technology is not mature, the edge sealing is not strict, and the plate is easily absorbed by moisture and causes the furniture to expand and damage. Mei'an Chunmei said: When using panel furniture in summer, pay attention to waterproofing, install waterproof pads under the furniture legs that are easy to absorb water, and keep the ventilation distance near the walls of the outer wall and bathroom.
Glass steel furniture Do not let the oil stay on the surface for too long. The glass and marble table and coffee table are favored by young people because of its simple atmosphere and fashionable appearance. In the summer, it is necessary to pay attention to natural materials such as glass and stone to avoid direct sunlight. Long-term exposure will affect the service life of all furniture. Glass steel dinette, need to be careful not to let the oil stay on the table and other places for too long.
In short, no matter what kind of furniture, you should try to avoid the outdoor sun to expose the whole or part of the furniture for a long time. It is best to avoid the place where the sun shines, or to separate the sunlight with translucent tulle curtains. Direct. In this way, it does not affect indoor lighting, but also protects indoor furniture.
In addition, the furniture should be kept away from heat sources or air conditioning vents to avoid damage or premature aging of the furniture due to large temperature differences. In addition to the protection against heat and humidity, we must also pay attention to the daily cleaning of furniture. Panel furniture is relatively easy to clean, and for solid wood furniture and leather furniture, care must be taken.
Source: GO Jiaju Furniture Network
Digital Tape Measure,Electronic Tape Measure,Laser Tape Measure,3 In 1 Digital Tape Measure
Yucheng Weisite Measuring Tools Co., Ltd , https://www.wsttool.com