When you decorate the room, you will encounter the problem of changing windows and doors. At this time, you have to remove the old doors and windows one by one, then fill the wounds and replace them with new doors and windows that make you satisfied. Unite. What are the steps for changing windows and doors? What are the precautions for changing windows and doors? Next, Xiaobian will take everyone to look at the relevant content of changing windows and doors .
First, what should be paid attention to when changing windows and doors
1. When decorating, as the window removal process will destroy the indoor and outdoor walls, it is best to replace the doors and windows first, and then proceed to the next renovation. The owner should clearly select which brand of profile? The profile of the profile will determine the grade of the entire door and window, sealing and aging issues, buyers should not be blinded by the concept of "low-cost plastic steel doors and windows" in the market.
2. When purchasing, you must go to the formal building materials market. The roadside stalls have simple processing equipment, and the accuracy and strength cannot be guaranteed. Especially for plastic steel doors and windows, the steel lining steel they made is of inferior quality, even without lining steel, and other accessories are also very poor.
3, the appearance of plastic steel doors and windows should be blue and white. The color is too white or gray, indicating that the stable components in the material are not enough, and it is easy to age and turn yellow.
4. Check if the hardware is flexible and smooth.
5. There should be aluminum slide rails in the lower part of the sliding window frame to facilitate replacement.
6, the sealing strip of the casement window should be free to replace | source, because the seal is shorter than the life of the form.
7. There should be a fixing piece in the middle of the sealing top of the sliding window sash, which is the key to the sealing performance of the sliding window.
8. During the installation process, the horizontal and vertical alignment of the doors and windows should be supervised. The sash is filled between the window frame and the source wall, and the inside and outside of the window frame must be sealed with silicone copper or sealant to prevent water seepage.
After the installation is completed, the protective film must be removed, otherwise the life of the doors and windows will be reduced.
Second, what do you need to do to change windows and doors?
1. Wipe the layer of cut glass.
2. According to the size of the inner frame of the sash, the strip is cut out, and the soft seal of the roll is manually embedded in the slot of the partition of the size of the partition, and the same length is cut by scissors.
3, first install the inner layer of glass, then put the septum strip and the sealing bead and the glass all tightly, then put the outer glass, and finally press the glass bead.
4. The glass shall not be in direct contact with the glass tank. The plastic spacers of different thickness shall be placed on the four sides of the glass according to the gap between the glass and the frame and the fan.
5. After installing the glass, arrange the sealing strip and the glass bonding surface, no wrinkles or looseness, and the glass should be flat and firm.
The above content is a wonderful introduction to the door and window, I hope that every reader can be heard and used in real life, you will benefit a lot. Well, today's introduction to the content of changing windows and doors is here. Thanks to readers and friends for reading this article and for their support and love for small series. If you want to get more information about home decoration, please continue to pay attention to the decoration home. network.
More related wonderful reading:
Matters needing attention when replacing doors and windows
An Outdoor Wall Sconce is a type of lighting fixture that is designed to be mounted on the exterior walls of a building. These Lighting Fixtures are typically used to provide illumination for outdoor areas such as patios, porches, and entryways. Outdoor wall sconces come in a variety of styles, sizes, and finishes to suit different architectural styles and personal preferences. They can be made from a range of materials including metal, glass, and plastic, and may feature various types of bulbs including LED, incandescent, and fluorescent. Some outdoor wall sconces are equipped with motion sensors or photocells to automatically turn on and off, providing added convenience and security.
Outdoor Wall Sconce,Outdoor Lamp Wall Sconce,Outdoor Wall Lantern,Modern Outdoor Wall Lamp
Zhengdong Lighting Co., Ltd. , https://www.zdlightingfixture.com