Home>Bearing knowledge>Specific details on the related matters of measuring the radial clearance of bearings

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

A unique and detailed discussion on the related matters of measuring radial clearance of bearings

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

.1) When measuring the feeler; it shall be operated in accordance with the rules of the standard; it shall not be measured by rolling the roller from the feeler.
.2) Regarding multi-row bearings; demand for each column clearance is acceptable; take the arithmetic mean of each column as the radial clearance of the bearing.
.3) Selecting the hand-push method to measure the demand measurement has a higher measurement technique. This method measures a large error; especially when the clearance is in a marginal condition; the simple error causes; at this moment; the measurement should be based on the instrument.
.4) Use special instrument measurement method whenever possible.
.5) During the measurement process, ensure that the ball falls into the bottom of the ditch; the closed bearing is measured before closing; when using a loaded instrument, the measured value should also reduce the amount of play increase caused by the load.

---

Recommend to friends comments close window

Bearing related knowledge

Characteristics of joint bearings (3) Eight functional requirements for motor bearing grease The SKF bearing cage improves the reliability of the 7215 bearing (3) SKF single row angular touch ball bearing suffix meaning

This article links to http://
Please indicate the bearing network http://

Previous:Analysis of classification and application of hybrid ceramic bearings Next:The importance of smooth oil in TIMKEN joint bearings

House Model

House Model,Duplex House Models,Mini House Model,Model Of A House

Nanjing Great Century Art Model Co., Ltd. , , https://www.dsjysmx.com